Light 4-Axis Motion Control Universal PCI Card

Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW modePulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper settingSupports 2 axis linear interpolationSupports T/S-curveSupports speed overrideHardware emergency inputWatchdog timerSupports programmable acceleration/deceleration rateProgrammable interruptRDY dedicated input channels & SVON/ERC dedicated output channels are switchable for general input and output purposes

Counter/Encoder Input - Counting Range: 32-bit | Encoder Type and Interface - Counts per Enc. Cycle: x1, x2, x4 (A/B phase only) | Encoder Type and Interface - Input Range: 0~1 VDC for low; 3.5~5 VDC for high | Encoder Type and Interface - Input Type: Quadrature (A/B phase) or up/down | Encoder Type and Interface - Max. Input Frequency: 4 MHz under x4 A/B phase mode | Frequency - Signal Input: Logic level 1: 10~30 VDC Logic level 0: 0~3 VDC | General - Connectors: 1 x 100-pin SCSI female connector | General - Humidity (Operating): 5~95% RH (non-condensing) | General - Humidity (Storage): 5~95% RH (non-condensing) | Local I/O - General Input Signal: Input voltage: 24 VDC Max. Input delay: 100 us Max. (isolation delay) Signal: EMG (emergency stop) ORG, LMT+, LMT- INPOS (in position signal) LTC (counter latch) RDY (servo ready) ALARM (servo alarm) | Local I/O - General Output Signal: Output voltage: Open collect 24 VDC Max Output delay: 100 us Max. (isolation delay) Sink current: 100 mA per channel Signal: CMP (position compare in range output) SVON (servo on) RALM (reset driver alarm) ERC (counter clear signal) | Pulse Type Motion Control - Interpolation: 2-axis linear interpolation | Pulse Type Motion Control - Max. Output Speed: 1 Mbps | Pulse Type Motion Control - Motor Driver Support: Pulse-type servo/stepping | Pulse Type Motion Control - Pulse Output Type: Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type) | Pulse Type Motion Control - Step Count Range: ±2, 147, 483, 646 | Pulse Type Motion Control - Velocity Profiles: T-Curve, S-Curve

• Model: PCI-1245L-AE
• Contact Us: +91 96993 71392
• Email: sales@elationind.com
• Worldwide Shipping Available